80XLEReturn to Utility Loaders
All-welded boom construction with fabricated box type design includes engineered sweeping curves for added strength and increased fatigue resistance. The telescoping boom features a 3’ telescoping section providing either 25’ or 27’ of reach at maximum extension.
Dedicated Swing Circuit
A triple gear pump produces up to 62 gallons per minute, with one pump section dedicated to the planetary swing drive that allows simultaneous operation of the boom and swing system without losing flow to necessary functions.
Rotary manifold allows for 360-degree continuous boom rotation and provides electrical and hydraulic power to the lower frame.
Hydraulic control valves are mounded under the joysticks with manual linkages that control each valve section for boom and grapple functions.
Bolt-On Cylinder Glands
Bolt-on cylinder glands make on-site service easy, while seal rings extend product life. Cylinders are made of heavy-duty steel tubing, and heavy chrome cylinder rods are heat-treated for added strength.
Various pedestal heights are available for truck or trailer mounting with or without the use of a small spacer.
Telescopic stabilizers controlled from the platform or the ground help keep loads steady. Housings are attached to the pedestal with large bolts so they can be removed easily for service.
Mounting bolts and support plates are supplied. Loader is also equipped with load securing posts and dual ladders with non-slip treading.
LED Boom and platform lights, Grapples, hydraulic accessories (pump, oil reservoir, and oil cooler) are available.
|A-Frame Width||25.625" (65 cm)|
|A-Frame Height||5' 3" (158 cm)|
|Stabilizer Width||10' 3" (312 cm)|
|Total Operating Weight||5,985 lbs (2,715 kg) loader with telescoping boom with cylinders (excluding grapple and options)|
|Additional Dimensions||Download spec sheet for additional product dimensions|
TRAILER/TRUCK MOUNT +
|Stabilizers||Telescopic stabilizers with 43" (109 cm) stroke cylinders enclosed in tubular and fabricated box style assembly with wear plates|
|Source||Customer supplied power take-off|
|Tank||45 gal. (170 L) with suction and return line filters|
|Pump||Triple gear pump producing 26/21/15 GPM (98/79/57 LPM) at 1,600 RPM Triple gear pump producing 26/21/15 GPM (98/79/57 LPM) at 1,600 RPM|
|Operating Pressure||3,200 psi (220 bar) main system|
|Valves||Sectional control type with mechanical joysticks|
|Features||Heavy-wall tubing and 4-wire hose; independent swing system with direct-linked foot controls, rotary manifold to allow continuous rotation|
|Structure||Fabricated box style design with all welded construction and wear plates; bronze bushing with grease grooves at boom pivot points; (2) 55W halogen work lamps on stick boom|
|Standard Boom||22' to 25' (671 to 762 cm) telescoping|
|Horizontal Reach||24' 10" (757 cm)|
|Vertical Reach||37' 3" (1,140 cm) from ground when mounted on 44" (112 cm) truck frame|
|Cylinder Features||Hydraulic cylinders with spherical bearings and wear rings on glands and pistons; heavy wall honed steel tubing; heat-treated cylinder rods with heavy chrome plating; induction hardened rods and bolt-on glands|
|Main Boom Cylinder||5" x 36" (127 x 914 mm) with 3" (76 mm) rod|
|Stick Boom Cylinder||5" x 30" (127 x 762 mm) with 2.5" (63.5 mm) rod|
|Maximum Front Lift Capacity (25' Boom)||10,450 lbs (4,740 kg) with 5' (1.5 m) radius
9,540 lbs (4,327 kg) with 10' (3.0 m) radius
6,370 lbs (2,889 kg) with 15' (4.6 m) radius
4,670 lbs (2,118 kg) with 20' (6.1 m) radius
1,250 lbs (566 kg) at full reach
SWING SYSTEM +
|Rotation||Continuous rotation on 27" (686 mm) external tooth turntable bearing, powered by hydraulic motor and single stage planetary gearbox|
Spacers to accommodate various frame heights
Oil cooler kit with 12-volt fan
Left hand platform
55W halogen work lamps