80XLReturn to Utility Loaders
The Barko 80XL utility loader delivers exceptional productivity day in and day out. Engineered with efficiency in mind, the machine offers a maximum front lift capacity of 12,250 pounds.
All-welded boom construction with fabricated box type design includes engineered sweeping curves for added strength and increased fatigue resistance. Straight booms are available in 22’ and 26’ of reach.
Dedicated Swing Circuit
A triple gear pump produces up to 62 gallons per minute, with one pump section dedicated to the planetary swing drive that allows simultaneous operation of the boom and swing system without losing flow to necessary functions.
Rotary manifold allows for 360-degree continuous boom rotation and provides electrical and hydraulic power to the lower frame.
Hydraulic control valves are mounded under the joysticks with manual linkages that control each valve section for boom and grapple functions.
Bolt-On Cylinder Glands
Bolt-on cylinder glands make on-site service easy, while seal rings extend product life. Cylinders are made of heavy-duty steel tubing, and heavy chrome cylinder rods are heat-treated for added strength.
Various pedestal heights are available for truck or trailer mounting with or without the use of a small spacer.
Telescopic stabilizers controlled from the platform or the ground help keep loads steady. Housings are attached to the pedestal with large bolts so they can be removed easily for service.
Mounting bolts and support plates are supplied. Loader is also equipped with load securing posts and dual ladders with non-slip treading.
LED Boom and platform lights, Grapples, hydraulic accessories (pump, oil reservoir, and oil cooler) are available.
|A-Frame Width||25.625" (65 cm)|
|A-Frame Height||5' 3" (158 cm)|
|Stabilizer Width||10' 3" (312 cm)|
|Total Operating Weight||5,305 lbs (2,406 kg) loader with standard boom with cylinders (excluding grapple and options)|
|Additional Dimensions||Download spec sheet for additional product dimensions|
TRAILER/TRUCK MOUNT +
|Stabilizers||Telescopic stabilizers with 43" (109 cm) stroke cylinders enclosed in tubular and fabricated box style assembly with wear plates|
|Source||Customer supplied power take-off|
|Tank||45 gal. (170 L) with suction and return line filters|
|Pump||Triple gear pump producing 26/21/15 GPM (98/79/57 LPM) at 1,600 RPM|
|Operating Pressure||3,200 psi (220 bar) main system|
|Valves||Sectional control type with mechanical joysticks|
|Features||Heavy-wall tubing and 4-wire hose; independent swing system with direct-linked foot controls, rotary manifold to allow continuous rotation|
|Structure||Fabricated box style design with all welded construction; bronze bushing with grease grooves at boom pivot points; (2) 55W halogen work lamps on stick boom|
|Standard Boom||22' (671 cm) straight|
|Horizontal Reach||21' 10" (665 cm)|
|Vertical Reach||34' 5" (1,049 cm) from ground when mounted on 44" (112 cm) truck frame|
|Cylinder Features||Hydraulic cylinders with spherical bearings and wear rings on glands and pistons; heavy wall honed steel tubing; heat-treated cylinder rods with heavy chrome plating; induction hardened rods and bolt-on glands|
|Main Boom Cylinder||5" x 36" (127 x 914 mm) with 3" (76 mm) rod|
|Stick Boom Cylinder||5" x 30" (127 x 762 mm) with 2.5" (63.5 mm) rod|
|Maximum Front Lift Capacity - 22' (6.7m) straight boom, less attachment||11,130 lbs (5,048 kg) with 5' (1.5 m) radius
12,250 lbs (5,556 kg) with 10' (3.0 m) radius
8,480 lbs (3,846 kg) with 15' (4.5 m) radius
5,730 lbs (2,600 kg) with 20' (6.1 m) radius
2,610 lbs (1,183 kg) at full reach
SWING SYSTEM +
|Rotation||Continuous rotation on 27" (686 mm) external tooth turntable bearing, powered by hydraulic motor and single stage planetary gearbox|
26-foot (792 cm) straight boom
Spacers to accommodate various frame heights
Oil cooler kit with 12-volt fan
Left hand platform
55W halogen work lamps