160AReturn to Utility Loaders
The 160A is powered by a customer-supplied PTO.
Wider, all-welded boom construction with fabricated tube type design includes engineered sweeping curves for added strength and increased fatigue resistance.
Rotary manifold allows for 360-degree continuous boom rotation and provides electrical and hydraulic power to the lower frame.
Sectional control type valves come with mechanical joysticks.
Zinc Plated Pins
Extra large zinc plated pins and bolts provide added durability in high-stress areas.
Cylinders are made of heavy-duty steel tubing, and heavy chrome cylinder rods are heat-treated for added strength.
Comfortable operator platform includes a fold-down seat with armrests. The rotating platform includes beneath-the-seat style valve mounting and foot swing pedal.
Mounting bolts and support plates are supplied. Loader is also equipped with load securing posts and dual ladders with non-slip treading.
One set of independently operated foldaway stabilizers helps keep loads steady.
|A-Frame Width||41" (101 cm)|
|A-Frame Height||5' 11" (180 cm)|
|Stabilizer Width||15' (457 cm)|
|Total Operating Weight||9,750 lbs (4,423 kg) loader with standard boom (excluding attachment and oil)|
|Additional Dimensions||Download spec sheet for additional product dimensions|
TRAILER/TRUCK MOUNT +
|Stabilizers||(1) set of independently operated 13' 4" (406 cm) foldaway stabilizers with (2) 6" x 17" (152 x 432 mm) cylinders with 3" (76 mm) rods and bolt-on load locks|
|Source||Customer supplied power take-off|
|Tank||42 gal. (159 L) with externally serviceable suction screens, 33 micron return line filter, sight gauge|
|Pump||Triple gear pump producing 31/23/14.5 GPM (118/87/55 LPM) at 1,500 RPM|
|Operating Pressure||2,500 psi (172 bar) main system|
|Valves||Sectional control type with mechanical joysticks|
|Features||Heavy-wall tubing and 4-wire hose; independent swing system with direct-linked foot controls, rotary manifold to allow continuous rotation|
|Structure||Fabricated tube type design with all welded construction; bronze bushings with grease grooves at boom pivot points|
|Standard Boom||27' (823 cm) straight|
|Horizontal Reach||26' 4" (803 cm) from pivot|
|Vertical Reach||36' 3" (1,105 cm) from ground when mounted on 44" (112 cm) truck frame|
|Cylinder Features||Hydraulic cylinders with wear rings on glands and pistons; heavy wall honed steel tubing; heat-treated cylinder rods with heavy chrome plating|
|Main Boom Cylinder||(2) 6" x 36" (152 x 914 mm) with 2.5" (63.5 mm) rods|
|Stick Boom Cylinder||7" x 30" (178 x 762 mm) with 3" (76 mm) rods|
|Maximum Front Lift Capacity (27' Boom)||18,860 lbs (8,555 kg) with 10' (3.0 m) radius
12,730 lbs (5,774 kg) with 15' (4.6 m) radius
9,580 lbs (4,345 kg) with 20' (6.1 m) radius
6,570 lbs (2,980 kg) with 25' (7.6 m) radius
2,500 lbs (1,134 kg) at full reach
SWING SYSTEM +
|Rotation||Continuous rotation on 39" (991 mm) turntable bearing, powered by twin motors and planetary swing drives|
Stick boom heel racks