95-SER-ERS

Return to Stationary Electric Loaders

Barko's 95-SER-ERS stationary electric loader features a remote power unit. The 95-SER-ERS is an excellent solution for non-mobile applications in wood processing, scrap, waste/recycling, aggregates and other applications.

DOWNLOAD SPEC SHEET

FEATURES SPECIFICATIONS OPTIONS

FEATURES -

Power Sources

The 95-SER-ERS is available with a 50-HP (37 kW) open drip proof encapsulated electric motor, electrical enclosure with motor start circuit, and start/stop switches supplied for the control console.

Pedestal

The loader is mounted on a 27.5-inch-tall (699 mm) pedestal with 39-inch (991 mm) diameter bottom plate.

Load Sensing Hydraulics

Load sensing valves and pump deliver excellent multifunctioning and efficiency by matching pressure and flow.

Customizable Control System

Combining electro-hydraulic valve controls with the Parker IQAN system, the loader controls can easily be configured to match the application or operator preferences for smooth and efficient operation that reduces operator fatigue.

Joystick Controls

Ergonomically designed, multi-functional, dual electric-controlled joysticks are supplied for mounting in the operator station.

Boom Construction

Wider, all-welded boom construction with fabricated box type design includes engineered sweeping curves for added strength and increased fatigue resistance.

Boom Position Sensors

Position sensors monitor main boom and stick boom position location and can be used to limit range of motion, if necessary, to prevent the loader from contacting structures or other obstructions when working in tight spaces.

Swing Torque

A high strength hydraulic motor and planetary gearbox produce 14,870 foot-pounds (20,161 Nm) of swing torque.

Zinc Plated Pins

Extra-large zinc plated pins provide added durability in high-stress areas.

Bolt-On Cylinder Glands

Bolt-on cylinder glands make on-site service easy, while piston rings extend product life. Cylinders are made of heavy-duty steel tubing, and heavy chrome cylinder rods are heat-treated for added strength.

Centralized Greasing

Single location greasing at the base of the loader makes it easy to grease typically hard-to-reach locations.

SPECIFICATIONS +

DIMENSIONS -

Overall Height	68” (172.7 cm)
Overall Width	45.0” (114.3 cm)
Overall Length	25’2” (7.7 m) * to boom pin center *
Curb Weight	4550 lbs (2064 kg)

PEDESTAL +

Height	27.5” (69.9 cm)
Bottom Plate	30” (76.2 cm) diameter, 1.5” (3.8 cm) thick
Bottom Holes	1” nominal diameter bolt holes (24) on a 26” diameter bolt circle

HYDRAULIC POWER UNIT DIMENSIONS +

Overall Height	43.0” (109.2 cm)
Overall Width	36.0” (91.4 cm)
Overall Length	88.0” (223.5 cm)
Curb Weight	2200 lbs (998 kg)

HYDRAULIC POWER UNIT SPECS +

Required Power Source	480VAC 3-Phase 60Hz, circuit-protected 85A rated feeder
Electric Motor	50 HP (37 kW) TEFC (Totally Enclosed Fan Cooled)
Hydraulic Pump	(1) Axial Piston, load sensing
Hydraulic Reservoir	45 Gal (170 L) with cleanout cover with optional pre-heater for cold climates
Hydraulic Filtration	(1) Spin-on main return, (1) Spin-on case drain
Hydraulic Oil Cooler	Efficient aluminum core with fan driven by 1/2 HP (0.37 kW) TEFC motor

BOOM +

Structure	All-welded construction with fabricated box type design; 2.5” (6.4 cm) pins with bronze bushings on main and jib pivots
Horizontal Reach	22’ 4” (7.7 m)
Main Boom Hydraulic Cylinder	5.0” (12.7 cm) Bore x 3.0” (7.6 cm) Rod
Jib Boom Hydraulic Cylinder	5.0” (12.7 cm) Bore x 2.5” (6.4 cm) Rod
Lift Capacity 5’ (1.5 m) Above Ground	9889 lbs (4486 kg) @ 10ft (3.0 m) 6947 lbs (3151 kg) @ 15ft (4.6 m) 5510 lbs (2499 kg) @ 20ft (6.1 m) 1810 lbs (821 kg) @ full reach
Features	- Accumulator on main lift cylinder circuit to absorb shock loads - Guarding over hydraulic lines on jib boom

SWING +

Swing Performance	8 rpm, 14,870 ft-lb (20,161 N-m) (100% Theoretical)
Swing Bearing	27” (68.6 cm) outer diameter, external gear
Swing Drive	Single stage planetary gearbox with hydraulic motor and gear lube reservoir for easy visual inspection and fill
Features	- Continuous rotation standard - Non-continuous rotation through included stop block kit - adjustable in 15° increments from 180° to 300° flexible installation

OPTIONS +

Pedestals

Customized riser extensions or adaptor bases for existing foundations (consult factory)

25’ Boom (7.6 m)

Maximum Reach – 25’ 4” (7.7 m)

29’ Boom (8.8 m)

Maximum Reach – 29’ (8.8 m)

Operator Control Station

Mounting solutions for control station components (consult factory)

Automatic greasing

Programmable, automated greasing solution that reduces daily maintenance requirements

Hydraulic Tank Heater

Heats hydraulic fluid to proper operating temperature for cold climates.

Boom Lights

Enhance operator effectiveness in challenging lighting conditions.

Attachments

Various attachments available (consult factory)

Tracked Harvesters

Tracked Feller Bunchers

Tracked Processors

Truck & Trailer Mount Loaders

Tracked Loaders

Utility Loaders

Rough Terrain Carrier Loaders

Stationary Electric Loaders

Wheeled Feller Buncher

Strong-Arm Grapples

Industrial Wheeled Tractors