| Boom Data |
|
|
|
| |
35' 5 " |
|
|
| Main |
25' 0 " |
(7.62 m) |
|
| Stick |
14' 0" |
(4.27 m) |
|
| |
| Boom Structure |
|
|
|
| • All welded construction with fabricated box type design |
| • Aluminum bronze bushings with grease grooves at boom pivot points |
| |
|
|
|
| Boom Reach |
| |
35' 5 " |
|
|
| Horizontal |
35' 5 " |
(10.79 m) |
|
| Vertical |
27' 0 " |
(8.23 m) |
|
| Below Grade |
16' 0" |
(4.87 m) |
|
| Based on 35' 5" (10.79 m) Gooseneck Style Boom. |
| |
|
|
|
| Cylinders |
| • Hydraulic cylinders with wear rings on pistons and bolt on glands for extended life. |
| • All cylinders are made of heavy wall steel tubing. Induction hardened cylinder rods with heavy chrome plating. |
| • Main boom: 7" x 51" (178 mm x 1295 mm) with 4" (102 mm) rod. |
| • Stick boom: 7" x 44 " (178 mm x 1117 mm) with 4" (102 mm) rod. |
| |
|
|
|
| Power Source |
| • Cummins QSM11 - 10.8L diesel 400 HP (298 kw) @ 1800 RPM. |
| • Fuel Reservoir: 245 gallon (927 L). |
| |
|
|
|
| Hydraulic System |
| • 125 gallon (472 L) hydraulic oil reservoir with return line filter, shut off valve on pump suction line. |
| • Main Pumps: 2 Variable displacement piston pump producing 114 GPM (431 LPM). |
| • Mulcher Pump: variable displacement piston pump producing up to 143 GPM (541 LPM) @ 4400 PSI (30,338 KPA) |
| • Mulcher system operating pressure up to 5000 PSI (34,475 KPA) @ 126 GPM (476 LPM). |
| • Heavy wall tubing and multi-wire braided hose throughout system. |
| • Main system operating pressure: 3,600 PSI (24,822 KPA). |
| • Drive system operating pressure: 4500 PSI (31,027 KPA). |
| • Mulcher system operating pressure: 5000 PSI (34,475 KPA). |
| • Continuous rotation. |
| |
| Swing System |
| • Continuous rotation on 54" (1372 mm) internal tooth turntable bearing. |
| • Swing speed 9 RPM - Power transmitted through dual piston motors and planetary gearboxes. |
| • Swing torque: 62,112 ft. lbs. (100 % theoretical). |
| |
| Operator's Cab |
| • F.O.P.S. certified. |
| • 38-1/2" x 55" (978 mm x 1397 mm) forward sloping pressurized cab with sound suppression insulation. |
| • All windows tinted. |
| • 1/2" Lexan on all Windows. |
| • Air Knife. |
| • Adjustable suspension style seat with arm rests and 4 point harness. |
| • Dual joystick controls. |
| • Dash console with cab accessory switches and start/stop controls all located for easy access. |
| • AM/FM CD radio |
| • Hand swing control. |
| • Swing out door. |
| • 12 volt DC double halogen cab lights on front and side of cab. |
| • Cab heater. |
| • Air conditioning. |
| |
| Instrumentation |
| Electronic Display |
| • Fuel |
| • Engine Temperature |
| • Engine oil Pressure |
| • Hydraulic Oil Temperature |
| • Engine Speed |
| • Voltage |
| • Hours |
| Diagnostic Pressure Display |
| • Pilot Pressure |
| • Machine Pump Pressure |
• Mulcher Accelerate Pressure |
| • Mulcher Braking Pressure |
| • Load Sense Pressure |
| |
| Crawler Lower - Heavy Duty |
| • Speed (maximum): 1.1 low 2.8 high |
| Track: Barko heavy-duty (D 7 size) carbody, sealed track, lifetime lubricated rollers and idlers, hydraulic track adjusters and triple grouser pads (700 mm, 800 mm, or 900 mm) with 22 mm track bolts. |
| • Drive motors: two (2) variable displacement piston motors. |
| • Brakes: Automatic multiple disc-type, spring applied hydraulic release, on each track. |
| |
| Miscellaneous |
| • 69,000 lbs less attatchment. |
| • Cast steel counterweight: 13,000 lb. |
| • Equipment greased and hydraulic tank filled. |
| • Switchable pedal direction for track control. |
| • 12V lights on front and side of fuel tank and rear of hydraulic tank. |
| • Side and Rear view cameras. |
| |
| Options/Accessories |
| • John Deere 6090 HF 9.0L engine 375 HP (280 kW) @ 2,200 RPM |
| |
| Barko Hydraulics reserves the right to change specifications and prices without notice in order to follow its policy of constantly striving to manufacture a better product without incurring any liability to provide these new features on any units previously manufactured. |
