| Max Lift Capacity |
| 30' 0" (9.14 m) straight boom, less attachment |
| |
| Radius |
Lift |
|
|
| 10' (3.05 m) |
19,960 lbs |
(9,054 kg) |
|
| 15' (4.57 m) |
17,390 lbs |
(7,888 kg) |
|
| 20' (6.10 m) |
12,920 lbs. |
(5,860 kg) |
|
| 25' (7.62 m) |
10,240 lbs. |
(4,644 kg) |
|
| 30' (9.14 m) |
5,420 lbs. |
(2,458 kg) |
|
| |
| Boom Data |
|
|
|
| |
30' 0" |
(9.14 m) |
|
| Main |
16' 8" |
(5.08 m) |
|
| Stick |
13' 6" |
(4.11 m) |
|
| All Welded construction with fabricated box type design. Bronze bushings with grease grooves at boom pivot points. |
| |
| Boom Reach |
| |
30' 0" |
(9.14 m) |
|
| Horizontal |
30' 0" |
(9.14 m) |
|
| Vertical |
37' 6" |
(11.43 m) |
|
| Based on 42" (1,067 mm) high truck frame. |
| |
|
|
|
| Cylinders |
| • Hydraulic cylinders with wear rings on pistons and bolt on glands for extended life. |
| • All cylinders are made of heavy wall steel tubing. Induction hardened cylinder rods with heavy chrome plating. |
| • Main boom: 6 " x 51" (152 mm x 1295 mm) with 3-1/2" (89 mm) rod. |
| • Stick boom: 6 " x 35" (152 mm x 889 mm) with 3-1/2" (89 mm) rod. |
| • Spherical bearings at all boom cylinder pivots. |
| |
|
|
|
| Power Source |
| • Cummins QSB 6.7 L diesel, Tier 3 173 hp (129 kw)
@ 2200 rpm. |
| • John Deere 6068 H diesel, Tier 3 173 hp (129 kw)
@ 2200 rpm. |
| • Fuel Reservoir: 120 gallon (454 L). |
| |
|
|
|
| Hydraulic System |
| • 120 gallon (454 L) hydraulic oil reservoir with return line filter, shut off valve on pump suction line. |
| • Pumps: Variable displacement piston pump producing 88 GPM (333 LPM). |
| • Heavy wall tubing and multi-wire braided hose throughout system. |
| • Main system operating pressure 3000 PSI (206 BAR). |
| • Quick disconnect diagnostic ports. |
| |
| Swing System |
| • Continuous rotation on 39" (889 mm) internal tooth turntable bearing. |
| • Swing speed 8 RPM - Power transmitted through dual piston motors and planetary gearboxes. |
| • 3000 PSI (206 BAR) operating pressure. |
| • Swing Torque: 30,000 ft. lbs. (40,674 Nm)
(100% Theoretical). |
| • Tailswing: 8’ 5-1/2” (2.57 m) without counterweight
8’ 6-1/2” (2.60 m) with counterweight.. |
| |
| Operator's Cab |
| • F.O.P.S. certified. |
| • 38-1/2" x 55" (978 mm x 1397 mm) forward sloping pressurized cab with sound suppression insulation. |
| • Roof window, sliding side window, with tinted glass on all windows. |
| • Pantograph windshield wipers, washer, and dome light. |
| • Adjustable suspension style seat with arm rests. |
| • Dual joystick controls. |
| • Dash console with cab accessory switches and start/stop controls all located for easy access. |
| • Warning lights and monitor system. |
| • Digital Display: water temperature, voltage, engine oil pressure, fuel, hour meter and engine RPM. |
| • AM/FM radio, CD player, CB radio. |
| • Swing control operated by foot pedal. |
| • Swing out door and front cab guard. |
| • (6) 12 volt DC halogen cab lights. |
| • Climate controlled heating and air conditioning. |
| • Central turntable greasing system. |
| |
| Stabilizers/Subframe/Pads |
| • Center Mount |
| • Unitized subframe and stabilizer assembly. |
| • 2 sets 14’ 9” (4.49 m) fold-a-way stabilizer with
6” x 22” (152 mm x 559 mm) cylinders with
3-1/2 (89 mm) rods and dual load locks,
pistons and bolt on glands with wear rings. |
| |
| Art Car Lower |
| • Hydrostatic drive. |
| • Oscillating non-powered front axle rated for 23,000 lbs. (10,433 kg) . |
| • Truck style tandem rear axles rated for 43,500 lbs. (19,731 kg). |
| • Orbitol steering with 3-1/2" x 12" (89 mm x 305 mm) cylinders. |
| • Hydraulic rear wheel brakes. |
| • Low Speed: 3 MPH (4.8 km/h) . |
| • High Speed 6 MPH (9.6 km/h) . |
| • Drawbar pull: 10,000 lbs (45,371 N). |
| • Wheelbase: 13’ 11” (4.24 m) . |
| • Rear tires: (8) 10:00 x 20 - 12 Ply (ReCaps). |
| • Front tires: (2) 15 x 22.5 16 ply. |
| • Spring applied hydraulic released parking brakes. |
| • Articulating nose cavity serves as a fillable
counterweight box. |
| |
| Miscellaneous |
| Weight with standard equipment, 3,000 lbs. (1361 kg) cast steel counterweight and oil: 52,000 lbs. (23,608 kg) (not including attachment). |
| • Equipment greased and hydraulic tank filled. |
| • Removable panel for serviceability. |
| |
| Options/Accessories |
| • 30’ Straight Boom. |
| • 30’ Live Heel Boom. |
| • Boom Lights. |
| • 3000 lb. (1360 kg) Cast steel counter weight. |
| • Guarding Package |
| • Standard detachable heel bar |
| • Offset detachable heel bar |
| • Log & Pulp Grapples |
| • Grapple Saw |
| • Servo Controlled Hand Swing |
| • Circle Saw Package |
| • Auxiliary Hydraulic Oil Cooler |
| • 23” Hydraulic Tilt Cab Riser |
| • 42” Fixed Cab Riser |
| • 42” Hydraulic Tilt Cab Riser |
| • 12V Hydraulic Transfer Pump |
| • Engine Block Heater |
| • Thermal Bypass Kit |
| • Tank Heater |
| • Automatic Grease System |
| • AFEX Fire Suppression System |
| • 5 kw Hydraulic Reservoir Heater |
| • 10 kw Hydraulic Reservoir Heater |
| • 15 kw Hydraulic Reservoir Heater |
| • 20 kw Hydraulic Reservoir Heater |
| • Water Separator Kit |
| |
| Barko Hydraulics reserves the right to change specifications and prices without notice in order to follow its policy of constantly striving to manufacture a better product without incurring any liability to provide these new features on any units previously manufactured. |
