Barko 595 SER ERS

The Barko 595 SER ERS is our 595 SE (stationary electric) with a remote power unit and an ERS (electric remote station) instead of a cab.

Dependable. Exceptional. BEAUTIFUL. That’s what customers say about the Barko 595 SER ERS. One of our largest and most powerful knuckleboom loader (material handler) also provides increased work productivity, and the lowest total cost of operation than any other product on the market.

It is BEAUTIFUL, but don’t let that fool you. The power and swing torque of the 595 SER ERS makes it a BEAST capable of delivering up to 25% more loads every day. Equipped with more standard features than its competitors, the 595 SER ERS lasts longer, performs harder, and delivers the results you expect. There’s nothing better than a Barko – You owe it to yourself to feel the difference!
FEATURES & BENEFITS



EASE OF
MAINTENANCE

ADDED STRENGTH


GREATER ACCURACY

STRONGEST BOOM
AVAILABLE

CLICK HERE
FOR MORE FEATURES & BENEFITS
 
  SPECIFICATIONS
DOWNLOADS
MAXIMUM LIFT CAPACITY
32' 0" (9.75 m) straight boom, less attachment.
 
Radius Lift    
12' (3.65 m) 38,180 lbs. (17,318 kg)  
15' (4.57 m) 30,290 lbs. (13,739 kg)  
20' (6.10 m) 22,580 lbs. (10,242 kg)  
25' (7.62 m) 17,990 lbs. (8,141 kg)  
30' (9.14 m) 12,810 lbs. (5,810 kg)  
32' (9.75 m) 7,770 lbs.

(3,524 kg)

 
 
BOOM DATA      
  32' 0" (9.75 m)  
Main 18' 6" (5.64 m)  
Stick 13' 10"

(4.22 m)

 
Boom Structure:        
• All welded construction with fabricated box type design.
• Aluminum bronze bushings with grease grooves at boom pivot points.
         
BOOM REACH
 
  32' 0" (9.75 m)  
Horizontal 32' 0" (9.75 m)  
Vertical 37' 7"

(11.45 m)

 
       
CYLINDERS
• Hydraulic cylinders with wear rings on pistons and bolt on glands for extended life.
• All cylinders are made of heavy wall steel tubing. Induction hardened cylinder rods with heavy chrome plating.
• Main boom: 7" x 51" (178 mm x 1295 mm) with 4" (102 mm) rod.
• Stick boom: 7" x 35" (178 mm x 889 mm) with 4" (102 mm) rod.
• Spherical bearings at all boom cylinder pivots.
 
AVAILABLE POWER SOURCES
• Drip-proof encapsulated electric motor, 125 HP, 3-phase, 460 volt, 60 Hz, operates at 1800 RPM.
• Electric collector: 4-pass, 300 amp capacity on each ring, mounted in pedestal base with continuous rotation only.
• Electrical package: Breaker, NEMA 4 enclosure with motor start circuit and 3 phase power monitor.
• Key start switch and emergency stop switch mounted on control console.
         
HYDRAULIC SYSTEM
• 150 gallon (568 L) hydraulic oil reservoir with return line filters and 100 mesh suction screen.
• Pump: Variable displacement piston pump producing 119 GPM (450 LPM).
• Heavy wall tubing and multi-wire braided hose throughout system.
• Main system operating pressure 3600 PSI (248 BAR).
• Accumulator for main boom cushioning.
• Quick disconnect diagnostic ports.
 
SWING SYSTEM
• Continuous rotation on 54" (1372 mm) internal tooth turntable bearing.
• Swing speed 7.5 RPM - Power transmitted through dual piston motors and planetary gearboxes.
• 3600 PSI (248 BAR) operating pressure.
• Swing torque: 55,000 ft lbs. (74,570 Nm) (100% theoretical).
 
MISCELLANEOUS
• Weight with standard equipment and oil: 21,500 lbs. (9,752 kg) (not including attachment).
• Equipment greased and hydraulic tank filled.
 
OPTIONS/ACCESSORIES
• 32' (9.75 m) Live heel boom.
• 36' (10.97 m) Straight boom.
• 36' (10.97 m) Live heel boom.
• Detachable heel bar.
• 12 volt DC boom lights.
• Hydraulic reservoir heater: 3 kw.
• 575 Volt electrical system.
 
Barko Hydraulics reserves the right to change specifications and prices without notice in order to follow its policy of constantly striving to manufacture a better product without incurring any liability to provide these new features on any units previously manufactured.

595 SER ERS Spec Sheet