| MAXIMUM LIFT CAPACITY |
| 32' 0" (9.75 m) straight boom, less attachment. |
| |
| Radius |
Lift |
|
|
| 12' (3.65 m) |
27,720 lbs. |
(12,574 kg) |
|
| 15' (4.57 m) |
21,960 lbs. |
(9,961 kg) |
|
| 20' (6.10 m) |
16,350 lbs. |
(7,416 kg) |
|
| 25' (7.62 m) |
12,990 lbs. |
(5,892 kg) |
|
| 30' (9.14 m) |
9,280 lbs. |
(4,209 kg) |
|
| 32' (9.75 m) |
5,590 lbs. |
(2,535 kg) |
|
| |
| BOOM DATA |
|
|
|
| |
32' 0" |
(9.75 m) |
|
| Main |
18' 6" |
(5.64 m) |
|
| Stick |
13' 10" |
(4.22 m) |
|
| Boom Structure: |
|
|
|
| • All welded construction with fabricated box type design. |
| • Aluminum bronze bushings with grease grooves at boom pivot points. |
| |
|
|
|
| BOOM REACH |
| Vertical height based on 33' (8.38 mm) high pedestal. |
| |
32' 0" |
|
|
| Horizontal |
32' 0" |
(9.75 m) |
|
| Vertical |
37' 7" |
(11.45 m) |
|
| Spherical bearings at all boom cylinder pivots. |
| |
|
|
|
| CYLINDERS |
| • Hydraulic cylinders with wear rings on pistons and bolt on glands for extended life. |
| • All cylinders are made of heavy wall steel tubing. Induction hardened cylinder rods with heavy chrome plating. |
| • Main boom: 6" x 51" (152 mm x 1295 mm) with 3-1/2" (89 mm) rod. |
| • Stick boom: 6" x 35" (152 mm x 889 mm) with 3-1/2" (89 mm) rod. |
| • Spherical bearings at bottom cylinder pivots. |
| |
| AVAILABLE POWER SOURCES |
| • Drip-proof encapsulated electric motor, 100 HP, 3-phase, 460 volt, 60 Hz, operates at 1800 RPM. |
| • Electric collector: 4-pass, 300 amp capacity on each ring, mounted in pedestal base with continuous rotation only. |
| • Electrical package: Breaker, NEMA 4 enclosure with motor start circuit and 3 phase power monitor. |
| • Key start switch and emergency stop switch mounted on control console. |
| |
|
|
|
| HYDRAULIC SYSTEM |
| • 120 gallon (454 L) hydraulic oil reservoir with return line filter, shut off valve on pump suction line. |
| • Pump: Variable displacement piston pump producing 88 GPM (333 LPM). |
| • Heavy wall tubing and multi-wire braided hose throughout system. |
| • Main system operating pressure 3,600 PSI (248 BAR). |
| • Quick disconnect diagnostic ports. |
| |
| SWING SYSTEM |
| • Continuous rotation on 46" (1168 mm) internal tooth turntable bearing. |
| • Swing speed 9 RPM - Power transmitted through dual piston motors and planetary gearboxes. |
| • 3,600 PSI (248 BAR) operating pressure. |
| • Swing torque: 44,000 ft. lbs. (59,656Nm) (100% theoretical). |
| • Tailswing: 8' 5-1/2" (2.57 m) without counterweight. 8' 6-1/2" (2.60 m) with optional counterweight. |
| |
| MISCELLANEOUS |
| • Weight with standard equipment and oil: 26,000 lbs. (11,793 kg) (not including attachment). |
| • Equipment greased and hydraulic tank filled. |
| • Removable panels for serviceability. |
| |
| OPTIONS/ACCESSORIES |
| • Detachable heel bar. |
| • Servo controlled hand swing. |
| • Carrier slasher delimber package. |
| • Circle saw slasher package. |
| • 32' 0" live heel boom. |
| • 12 volt DC boom lights. |
| • Hydraulic reservoir heater: 3 kw. |
| • Auxiliary electric collector packages. |
| • 575 volt electrical system. |
| • 3,000 # counterweight. |
| • 1,300 # counterweight. |
| • Log & pulpwood grapples. |
| |
| Barko Hydraulics reserves the right to change specifications and prices without notice in order to follow its policy of constantly striving to manufacture a better product without incurring any liability to provide these new features on any units previously manufactured. |
