| MAXIMUM LIFT CAPACITY |
| 30' 0" (9.14 m) straight boom, less attachment |
| |
| Radius |
Lift |
|
|
| 10' (3.05 m) |
19,960 lbs. |
(9,054 kg) |
|
| 15' (4.57 m) |
17,390 lbs. |
(7,888 kg) |
|
| 20' (6.10 m) |
12,920 lbs. |
(5,860 kg) |
|
| 25' (7.62 m) |
10,240 lbs. |
(4,644 kg) |
|
| 30' (9.14 m) |
5,420 lbs. |
(2,458 kg) |
|
| |
| BOOM DATA |
|
|
|
| |
30' 0" |
(9.14 m) |
|
| Main |
16' 8" |
(5.08 m) |
|
| Stick |
13' 6" |
(4.11 m) |
|
| |
| Boom Structure |
|
|
|
| • All welded construction with fabricated box type design |
| • Aluminum bronze bushings with grease grooves at boom pivot points |
| |
|
|
|
| BOOM REACH |
| |
30' 0" |
|
|
| Horizontal |
30' 0" |
(9.14 m) |
|
| Vertical |
36' 9" |
(11.20 m) |
|
| Vertical height based on 33" (8.38 mm) pedestal. |
| |
|
|
|
| CYLINDERS |
| Hydraulic cylinders with wear rings on pistons and bolt on glands for extended life. |
| • All cylinders are made of heavy wall steel tubing. Induction hardened cylinder rods with heavy chrome plating. |
| • Main boom: 6" x 51" (152 mm x 1295 mm) with 3-1/2" (89 mm) rod. |
| • Stick boom: 6" x 35" (152 mm x 889 mm) with 3-1/2" (89 mm) rod. |
| • Spherical bushings at all boom cylinder pivots. |
| |
|
|
|
| AVAILABLE POWER SOURCES |
| • Drip-proof encapsulated electric motor, 100 HP, 3-phase, 460 volt, 60 Hz, operates at 1800 RPM. |
| • Electric collector: 4-pass, 300 amp capacity on each ring, mounted in pedestal base with continuous rotation only.. |
| • Electrical package: NEMA 4 enclosure with motor start circuit and 3 phase power monitor. |
| • Key start switch and emergency stop switch mounted on control console. |
| |
|
|
|
| HYDRUALIC SYSTEM |
| • 150 gallon (568 L) hydraulic oil reservoir with return line filters and 100 mesh suction screen. |
| • Pumps: Triple gear pump producing 119 GPM (450 LPM). |
| • Heavy-wall tubing and multi-wire braided hose throughout system. |
| • Main system operating pressure 3000 PSI (206 BAR). |
| • Accumulator for main boom cushioning. |
| • 11 port rotary manifold for continuous rotation. |
| • Quick disconnect diagnostic ports |
•
| |
| SWING SYSTEM |
| • Continuous rotation on 39" (889 mm) internal tooth turntable bearing. |
| • Swing speed 8 RPM - Power transmitted through dual motors and planetary gearboxes. |
| • 3000 PSI (206 BAR) operating pressure. |
| • Swing torque: 30,000 ft. lbs. (40,674 Nm) (100% Theoretical). |
| |
| MISCELLANEOUS |
| • Weight with standard equipment and oil: 16,000 lbs. (7,257 kg), not including attachment). |
| • Equipment greased and hydraulic tank filled. |
| |
| OPTIONS/ACCESSORIES |
| • Detachable heel bar. |
| • Hydraulic reservoir heater: 3 kw. |
| • Rotation stops (310° maximum). |
| • 575 volt electrical system. |
| • 30' live heel boom. |
| • Log & pulp grapples. |
| |
| Barko Hydraulics reserves the right to change specifications and prices without notice in order to follow its policy of constantly striving to manufacture a better product without incurring any liability to provide these new features on any units previously manufactured. |
