| Max Lift Capacity |
| 30' 0" (9.14 m) straight boom, less attachment |
| |
| Radius |
Lift |
|
|
| 10' (3.05 m) |
19,960 lbs. |
(9,054 kg) |
|
| 15' (4.57 m) |
17,390 lbs. |
(7,888 kg) |
|
| 20' (6.10 m) |
12,920 lbs. |
(5,860 kg) |
|
| 25' (7.62 m) |
10,240 lbs. |
(4,644 kg) |
|
| 30' (9.14 m) |
5,420 lbs. |
(2,458 kg) |
|
| |
| Boom Data |
|
|
|
| |
30' 0" |
|
|
| Main |
16' 8" |
(5.08 m) |
|
| Stick |
13' 6" |
(4.11 m) |
|
| |
| Boom Structure |
|
|
|
| • All welded construction with fabricated box type design |
| • Aluminum bronze bushings with grease grooves at boom pivot points |
| |
|
|
|
| Boom Reach |
| |
30' 0" |
|
|
| Horizontal |
30' 0" |
(9.14 m) |
|
| Vertical |
36' 9" |
(11.20 m) |
|
| Vertical height based on 33" (8.38 m) pedestal. |
| |
|
|
|
| Cylinders |
| Hydraulic cylinders with wear rings on pistons and bolt on glands for extended life. |
| • All cylinders are made of heavy wall steel tubing. Induction hardened cylinder rods with heavy chrome plating. |
| • Main boom: 6" x 51" (152 mm x 1295 mm) with 3-1/2" (89 mm) rod. |
| • Stick boom: 6" x 35" (152 mm x 889 mm) with 3-1/2" (89 mm) rod. |
| • Spherical bushings at all boom cylinder pivots. |
| |
|
|
|
| Power Source |
| • Drip-proof encapsulated electric motor, 75 HP, 3-phase, 460 volt, 60 Hz, operates at 1800 RPM. |
| • Electric collector: 4-pass, 300 amp capacity on each ring, mounted in pedestal base with continuous rotation only. |
| • Cooling fan motor: 1/3 HP TEFC, 460V, 3 Phase, 60 HZ. |
| • Electrical package: Breaker, NEMA 4 enclosure with motor start circuit and 3 phase power monitor. |
| • Key start switch and emergency stop switch mounted on control console. |
| |
|
|
|
| Hydraulic System |
| • 114 gallon (431 L) hydraulic oil reservoir with return line filter, shut off valve on pump suction line. |
| • Pumps: Triple gear pump producing 119 GPM (450 LPM). |
| • Heavy wall tubing and multi-wire braided hose throughout system. |
| • Main system operating pressure 3000 PSI (20,685 KPA). |
| • Quick disconnect diagnostic ports. |
| • Continuous rotation. |
| |
| Swing System |
| • Continuous rotation on 39" (889 mm) internal tooth turntable bearing. |
| • Swing speed 8 RPM - Power transmitted through dual Geroler motors and planetary gearboxes. |
| • 3000 PSI (20,685 KPA) operating pressure. |
| |
| Operator's Cab |
| • F.O.P.S. certified. |
| • 38-1/2" x 55" (978 mm x 1397 mm) forward sloping pressurized cab with sound suppression insulation. |
| • Roof window, sliding side window, with tinted glass on all windows. |
| • Windshield wipers, washer, and dome light. |
| • Adjustable suspension style seat with arm rests. |
| • Dual joystick controls. |
| • Dash console with cab accessory switches and start/stop controls all located for easy access. |
| • Lighted gauge console. |
| • Warning lights and monitor system. |
| • Gauges: water temperature, voltage, engine oil pressure, fuel, hour meter. |
| • AM/FM cassette radio. |
| • Swing control operated by foot pedal. |
| • Swing out door and front cab guard. |
| • 12 volt DC halogen cab lights, inside front guard. |
| • Cab heater. |
| • Air conditioning. |
| • Central turntable greasing system. |
| |
| Stabilizers/Subframe/Pads |
| • One set of independently operated 14' 2" foldaway stabilizers using two 6" x 17" (152.0 mm x 432.0 mm) cylinders with 3" (76 mm) rods and bolt-on load locks. |
| |
| Miscellaneous |
| • Weight with standard equipment and oil: 12,750 lbs. (5,783 kg), less attachment. |
| • Equipment greased and hydraulic tank filled. |
| • Removable panels for serviceability. |
| |
| Barko Hydraulics reserves the right to change specifications and prices without notice in order to follow its policy of constantly striving to manufacture a better product without incurring any liability to provide these new features on any units previously manufactured. |
